Why Conduct Environmental and EMC Testing in Our Laboratories?

Whether you are a manufacturer of industrial products, you may face one of the following situations : 

• If your products are subject to the EMC Directive 2014/30/EU, you are obliged to assess them for regulatory recognition
• If you have a specific product and wish to have it tested for greater reliability or broader market recognition, we will work with you to establish a specific test specification
• If you want your products to be reliable, effective, and recognized, product certifications (CE / CPR marking, A2P, NF, NF&A2P,CNPP Certified…) are passports to recognition in the fields of security against malicious acts or fire safety
• If your product faces regulatory, normative or specific requirements, we implement pre-qualification/qualification test campaigns for your products

In our laboratories, we place your products in extreme conditions to simulate accelerated ageing and evaluate their ability to ensure correct functioning over time, even after exposure to stress levels near the limits of their intended use.

• Cold temperature testing according to EN 60068-2-1
• Dry heat testing according to EN 60068-2-2
• Damp heat testing according to EN 60068-2-78

• SO₂ corrosion testing according to EN 60068-2-42
• Salt spray testing according to EN 60068-2-11, EN 60068-2-52 or ISO 9227 

Determination of IP ratings specific to your equipment, testing the product’s ability to resist the ingress of solid objects and water according to EN 60529.

• Sinusoidal vibration testing according to EN 60068-2-6
• Random vibration testing according to EN 60068-2-64
• Half-sine shock testing according to EN 60068-2-27
• Impact testing according to EN 60068-2-75 and EN 62262

• Within our EMC laboratory located in the Eure region, less than 100 km from Paris, we conduct electromagnetic compatibility (EMC) tests designed to verify:
  • The ability of equipment to operate correctly in an electromagnetically disturbed environment         
  • That the level of electromagnetic emissions generated by equipment does not reach values that could compromise the proper functioning of other nearby devices

• Electrostatic discharge testing according to EN 61000-4-2
• Radiated electromagnetic field testing according to EN 61000-4-3
• Fast transient/burst testing according to EN 61000-4-4
• Surge (high-energy slow transients) testing according to EN 61000-4-5
• Induced RF field testing according to EN 61000-4-6
• Voltage dips and micro-interruptions according to EN 61000-4-11
• Magnetic field testing according to EN 61000-4-8 

• Radiated emissions according to CISPR 16-2-3, EN 55032, EN 61000-6-3, EN 61000-6-4, EN 61000-6-8, etc.
• Conducted emissions according to CISPR 16-2-1, EN 55032, EN 61000-6-3, EN 61000-6-4, EN 61000-6-8, etc.
• Harmonic current emissions according to EN 61000-3-2
• Voltage fluctuation testing according to EN 61000-3-3